{"id":3497,"date":"2023-06-09T12:23:39","date_gmt":"2023-06-09T12:23:39","guid":{"rendered":"https:\/\/raynexmedical.com\/x-ray\/?post_type=product&p=3497"},"modified":"2023-07-04T07:13:54","modified_gmt":"2023-07-04T07:13:54","slug":"canontoshiba-e7252-series-xray-tube","status":"publish","type":"product","link":"https:\/\/nikki.health\/x-ray\/product\/canontoshiba-e7252-series-xray-tube\/","title":{"rendered":"Canon\/Toshiba E7252 series X-Ray Tube"},"content":{"rendered":"

High speed rotating anode X-ray tube assembly for high energy radiographic and cine-fluoroscopic operations.<\/p>\n

The heavy anode is constructed with specially processed rhenium-tungsten faced molybdenum target which is 74 mm diameter and has an improved coating to increase thermal emissivity.<\/p>\n

These tubes have foci 1.2 and 0.6, and are available for a maximum tube voltage 150 kV.<\/p>\n

Accommodated with IEC60526 type high-voltage cable receptacles.<\/p>\n

General Data<\/h2>\n

IEC Classification (IEC60601-1:2005):<\/strong>\u00a0Class \u2160 ME EQUIPMENT<\/p>\n

Electrical:<\/h2>\n

Circuit:<\/strong>
\nHigh Voltage Generator: Constant Potential High-Voltage Generator
\nGrounding: Center-grounded<\/p>\n

Nominal X-ray Tube Voltage (IEC60613:2010):
\n<\/strong>Radiographic: 150 kV
\nFluoroscopic: 125 kV<\/p>\n

Nominal Focal Spot Value (IEC60336:2005):
\n<\/strong>Large Focus: 1.2
\nSmall Focus: 0.6<\/p>\n

Nominal Anode Input Power (at 0.1s) :<\/strong><\/p>\n

\n\n\n\n\n\n
<\/td>\n50 Hz<\/td>\n60 Hz<\/td>\n180 Hz<\/td>\n<\/tr>\n
Large Focus:<\/td>\n40.6 Kw<\/td>\n44.6 kW<\/td>\n75 kW<\/td>\n<\/tr>\n
Small Focus:<\/td>\n14.2 kW<\/td>\n16 kW<\/td>\n27 kW<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

 <\/p>\n

Nominal Radiographic Anode Input Power (IEC60613:2010):<\/strong><\/p>\n

\n\n\n\n\n\n
<\/td>\n50 Hz<\/td>\n60 Hz<\/td>\n180 Hz<\/td>\n<\/tr>\n
Large Focus:<\/td>\n36 Kw<\/td>\n40 kW<\/td>\n70 kW<\/td>\n<\/tr>\n
Small Focus:<\/td>\n14.2 kW<\/td>\n16 kW<\/td>\n27 kW<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

 <\/p>\n

Motor Ratings:1)<\/sup><\/strong><\/p>\n

\n\n\n\n\n\n\n\n\n\n\n
Stator: XS-AL<\/td>\nStarting<\/td>\nRunning<\/td>\n<\/tr>\n
Driven Frequency \u00a0 [Hz]<\/td>\n1802)<\/sup><\/td>\n\u00a060<\/td>\n1802)<\/sup><\/td>\n60<\/td>\n<\/tr>\n
Input Power\u00a0 [W]<\/td>\n1100<\/td>\n910<\/td>\n83<\/td>\n83<\/td>\n<\/tr>\n
Voltage\u00a04) 6)<\/sup>\u00a0 [V]<\/td>\n220<\/td>\n130<\/td>\n60<\/td>\n40<\/td>\n<\/tr>\n
Current\u00a05)<\/sup>\u00a0[A]<\/td>\n5.7<\/td>\n7.8<\/td>\n1.6<\/td>\n2.3<\/td>\n<\/tr>\n
Min. Speed Up\u00a02) 8)<\/sup>\u00a0[s]<\/td>\n1.2<\/td>\n1.8<\/td>\n\u2013<\/td>\n\u2013<\/td>\n<\/tr>\n
Capacitor [\u00b5F]<\/td>\n6<\/td>\n44<\/td>\n6<\/td>\n44<\/td>\n<\/tr>\n
Min. Braking 3) 8) [s]<\/td>\n3 \/ 90 V (DC)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Stator Resistance:
\n<\/strong>Common-Main Winding: 9.4 \u2126
\nCommon-Auxiliary Winding: 28.3 \u2126<\/p>\n

 <\/p>\n

\n\n\n\n\n\n\n\n\n\n\n
Stator: XS-RA<\/td>\nStarting<\/td>\nRunning<\/td>\n<\/tr>\n
Driven Frequency [Hz]<\/td>\n1802)<\/sup><\/td>\n50\/60<\/td>\n1802)<\/sup><\/td>\n50\/60<\/td>\n<\/tr>\n
Input Power [W]<\/td>\n2300<\/td>\n1450<\/td>\n300<\/td>\n80<\/td>\n<\/tr>\n
Voltage\u00a04) 6)<\/sup>\u00a0[V]<\/td>\n460<\/td>\n240<\/td>\n130<\/td>\n58<\/td>\n<\/tr>\n
Current\u00a05)<\/sup>\u00a0[A]<\/td>\n5.4<\/td>\n6.5<\/td>\n2.0<\/td>\n1.5<\/td>\n<\/tr>\n
Min. Speed Up\u00a02) 8)<\/sup>\u00a0[s]<\/td>\n1.0<\/td>\n0.6<\/td>\n\u2013<\/td>\n\u2013<\/td>\n<\/tr>\n
Capacitor [\u00b5F]<\/td>\n3<\/td>\n24<\/td>\n3<\/td>\n24<\/td>\n<\/tr>\n
Min. Braking 3) 8) [s]<\/td>\n1.5 \/ 90 V (DC)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Stator Resistance:
\n<\/strong>Common-Main Winding: 27.5 \u2126
\nCommon-Auxiliary Winding: 58.0 \u2126<\/p>\n

Note:<\/strong><\/p>\n

    \n
  1. To be obtained with AID starter Model 60\/180.<\/li>\n
  2. The speed up time from normal speed to high speed is 2\/3 times of the specified speed up time from 0 to high speed, which is described on motor rating table.<\/li>\n
  3. To be applied for high speed rotation.<\/li>\n
  4. Applied voltage between common and main terminal.<\/li>\n
  5. Common current.<\/li>\n
  6. The every applied voltage must be never exceeded 110% of the above specification.<\/li>\n
  7. No more than two high speed starts per minute are permissible.<\/li>\n
  8. The speed-up time is allowed up to 110% of the above specification.<\/li>\n<\/ol>\n

    Anode Speed:
    \n<\/strong>50 Hz: Minimum 2700 min-1
    \n60 Hz: Minimum 3200 min-1
    \n180 Hz: Minimum 9700 min-1<\/p>\n

    Resistance between Housing and Low Voltage Terminals:<\/strong>\u00a0Minimum 2 M\u2126<\/p>\n

    Normal Operating Range of the Housing Temperature:<\/strong>\u00a016 ~ 75 \u00b0C<\/p>\n

    Mode of Operation:<\/strong>\u00a0 Intermittent<\/p>\n

    Mechanical:<\/h2>\n

    Dimensions:<\/strong>\u00a0See dimensional outline
    \nOverall Length: 476 mm
    \nMaximum Diameter: 152.4 mm<\/p>\n

    Target:
    \n<\/strong>Anode Angle: 12 degrees
    \nDiameter: 74 mm
    \nConstruction: Rhenium-Tungsten faced Molybdenum<\/p>\n

    Filtration:
    \n<\/strong>Permanent Filtration: 0.9 mm Al \/ 75 kV IEC60522:1999
    \nAvailable Additional Filter combination (0.4 \u2013 1.5 mm): Maximum 2.4 mm Al \/ 75 kV<\/p>\n

    Radiation Protection (In accordance with IEC60601-1-3:2008):
    \n<\/strong>Leakage Technique Factor: 150 kV, 3.4 mA<\/p>\n

    X-ray Coverage:<\/strong>\u00a0430 \u00d7 430 mm at SID 1000 mm<\/p>\n

    Weight (Approx.):<\/strong>\u00a018 kg<\/p>\n

    High Voltage Receptacle:<\/strong>\u00a0To meet the requirements of IEC60526 Corrigendum1:2010<\/p>\n

    Cooling Method:<\/strong>\u00a0Natural or forced air<\/p>\n

    Tube Housing Model Number:
    \n<\/strong>E7252X: XH-106V
    \nE7252FX: XH-181
    \nE7252GX: XH-180<\/p>\n","protected":false},"excerpt":{"rendered":"

    High speed rotating anode X-ray tube assembly for high energy radiographic and cine-fluoroscopic operations. The heavy anode is constructed with specially processed rhenium-tungsten faced molybdenum target which is 74 mm diameter and has an improved coating to increase thermal emissivity. These tubes have foci 1.2 and 0.6, and are available…<\/p>\n","protected":false},"featured_media":3495,"template":"","meta":{"om_disable_all_campaigns":false},"product_cat":[76],"product_tag":[],"class_list":["post-3497","product","type-product","status-publish","has-post-thumbnail","hentry","product_cat-x-ray-components"],"_links":{"self":[{"href":"https:\/\/nikki.health\/x-ray\/wp-json\/wp\/v2\/product\/3497","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nikki.health\/x-ray\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/nikki.health\/x-ray\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nikki.health\/x-ray\/wp-json\/wp\/v2\/media\/3495"}],"wp:attachment":[{"href":"https:\/\/nikki.health\/x-ray\/wp-json\/wp\/v2\/media?parent=3497"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/nikki.health\/x-ray\/wp-json\/wp\/v2\/product_cat?post=3497"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/nikki.health\/x-ray\/wp-json\/wp\/v2\/product_tag?post=3497"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}